XMeye - How to Set Up Motion Detection Push Function on the App Sannce Vision?

Applies to:

DL41B/DL81B/DL41A/DL81A/DL41D/DL81D/DH81S/DH81X/DH81NG/DM41D/DM41A/DM81A/DN41D/DN81D/DN41S/DN41NA/DM41H/DM81H/DM21O/DM31O/DE41N/DE81N/DN81NB/DM81Z/DM61W/DG81CP/DG81CQ/DH81NK/DG81CR/DH41NK/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT41DC/DT61ER/DG41BE/DG81BE/NP41F/N43SU/N44SU/N48PZ/N481U/N441U/N44PBD/N461W

1. Please make sure your system's firmware build date is after 2016. If not, please contact support@sannce.com to upgrade.

In your email, please log in system and go to the Main Menu-->Info-->Version and tell us your system's version like V4.02.R11.85100115.10001.130900 and build date like 2015-05-25

2. Please enable the Mobile Reported function in the Main Menu-->System-->Netservice:

3. Go to the Main Menu-->Alarm-->Motion Detect to enable Mobile Reported.

4. Add the system to app Sannce Vision. here is the method.

https://support.sannce.com/hc/en-us/articles/900000448126

5. Enable Alarm Push in APP.

Please click Alarm-->click Alarm Push-->enable Allow Notifications on the app:

6.Please make sure you enable the notification right on your phone settings. And please also turn off low battery mode. Since different phones have different interfaces, please set it up according to your phone model.

7.After doing these settings, you will receive an alarm notification on the screen lock when the system detects something: