Type 2 - How to auto-add camera to NVR if you delete it from the channel (no need Ethernet cable)?

Applies to: NW41V/N441H/N441K/N28WEB/N441B/N441D/N441L/N44PAN/N44PAJ/N34WDB/N34WDD/N44WEB/N44WED/N44WEC/NW41V/N44WBD/N48WHP/N48WHE

If you delete the camera from the channel, you can auto-add it to the NVR by the following steps.

1. Please right-click the mouse and go to Video Manage, then tick Refresh. You can search for the camera‘s IP address. The IP address should be "172.20.14.X".

2. Then please go to the lower part, the Adding device part, choose the channel which you want to add the camera to, please be sure the channel you choose status is “No video source". If the status is not "No video source", but such as " IPC disconnect, please choose this channel, and click the "delete" button at the right side. The channel will be "No video source".

3. Then please back to the upper part. Choose the Channel, double click the IP address like 172.20.14.32 or click Auto-Add, then you can see the camera‘s status shows "Connect success"

5. Now, you can see the camera‘s image on the TV or monitor.