Sannce Cam - How to add the camera to the APP via the network cable?

Support Team

Applies to:

I21AD/I21AP/I21BK/I21AG/I21AK/I21AN/I21AS/I21AR/I21AC/I21AL/I21AH/I21BC/I31BC/I41CB/

I41CG/I41DC

1. Power on the camera.

2. Connect the camera to the router by ethernet cable.

MAKE SURE YOUR PHONE IS USING THE WIFI FROM THE SAME ROUTER.

3. Download app Sannce cam from google play store or apple store.

4. Run app and tap add Tap search to find the camera. The user name is admin and the default password is blank.

5. Go to wifi setting.

6. Select the wifi and input password.

7. The camera will reboot. Wait for a minute.

Go to wifi to check wifi status and remove ethernet cable of camera.

If phone APP is not able to set up wifi, you can try set up wifi on the computer.

Here are the steps:

1. download software to find the camera's IP. Here is software.

2. Access camera via its IP.

3. Go to wifi setting to select your wifi and input password.

4. The camera will reboot.

After rebooting, remove camera's ethernet cable.

If the search tool can still detect the camera, it means wifi is already connected.