Applies to I41ES
The camera supports recording constant videos for 24 hours. Please follow below instruction to set it up step by step.
- Before you set up the recording, please make sure an SD card has been inserted into the camera, and the SD card is recognized. Please go to the Settings of the camera.
- Then, please go to Storage Management to check the Storage Capacity. If the SD card is recognized, the capacity won't be 0.
- Next, please go to Advanced Settings.
- Finally, please turn on the Record switch.
Once the Record Switch is turned on, the camera will record videos for 24 hours.
Pack Duration: it means that each recording file will be 5 minutes. The users could adjust the length of the recordings files manually.
Audio: the camera will record audio for the video if it is turned on.
If you have a concern about the instruction, please submit a request to the help centre.
My iCsee application doesen't have the "Record Switch" option in advanced settings.
How can I get my camera to continuously record instead of recording only when the Human detection sensor triggers the record?
The SD car is installed properly. The device ir running the latest firmare version, Software V1.01.LITEOS...
My camera do not record. The smart alarm is not doing the recording when the motion is detected. Message is sent but no snapshot nor recording.
The card is working as the manual snapshot or manual recording is working as expected.
Can you help on this? Without motion detection and recording to the storage on the card the camera make no sense for me.
How can how can I record my video feed on a local hard drive and if that is not possible is there a bundle cloud package for multiple cameras thank you
Killroync Did you ever find a way to record to local HD?
Please sign in to leave a comment.