Type 1-How to connect an IP camera to the SANNCE DVR?

Applies to:

DL41B/DL81B/DL41A/DL81A/DL41D/DL81D/DH81S/DH81X/DH81NG/DM41D/DM41A/DM81A/DN41D/DN81D/DN41S/DN41NA/DM41H/DM81H/DM21O/DM31O/DE41N/DE81N/DN81NB/DM81Z/DM61W/DG81CP/DG81CQ/DH81NK/DG81CR/DH41NK/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT81DQ/DT41DC/DT61ER/DG41BE/DG81BE

Video transcription:

How to connect an IP camera to the DVR?

Notes:

1.The IP camera needs to support onvif protocol.

2.The DVR needs to support IP camera.

3.The resolution of the IP camera should be equal to or lower than that of the DVR's IP mode.

Click [Main Menu] Enter the password which you set on DVR system. If the password is not set before, the default is null and just keep the password box blank.

Click [System]-[Digital]-[Channel Type] to enter the channel type setting interface. Please change DVR to IP mode or IP analog mode. After the mode is changed, the syetem will restart.

Please connect the DVR and the IP camera to the same router with ethernet cable respectively so that they are working under the same network. （If it is a Wi-Fi IP camera, it will connect to the router via Wi-Fi rather than via the ethernet cable.)

Please click [Search], select the camera, click [Add], input the password and then click “Apply”.