Applies to: N48WHP
By default, the Sannce NVR (the recorder) model N48WHK works in the 4-channel mode with 4 pre-paired cameras in the kit.
However, this NVR can actually work with more cameras up to 8. To make it possible, please follow the steps below.
1. Switch the NVR to the 8-channel mode.
Setting route: Log in to the NVR on a TV or monitor, navigate to [Main Menu-->System-->Digital-->Channel Type], tick on the box for 8 channels as the red frame shown in the below picture, then click [OK]. The NVR will reboot automatically to apply the change.
2. Pair the additional camera(s) with NVR.
When the NVR is running again, log in and navigate to [Main Menu-->Wireless]
Click [Code for Wireless], and then power on the additional camera(s) one by one to add them to NVR.
After that, wait for about three minutes and the cameras should be added automatically.
On this screen, you can switch a camera from one channel to another. To do this, left-click on a camera's IP address, drag it then put it on another empty channel. In the below picture, the camera on channel 1 has been moved to channel 8.