Applies to: N48PT
You can refer to these steps below.
1. Pls connect the recorder to router with an ethernet cable
2. Please refer to this link below to fix recorder's IP.
3. Please apply a DDNS account the recorder supports. Here we take no-lp DDNS as an example. We go to www.no-ip.com to apply a DDNS account.
Notice: if your network's external IP is static, not dynamic, you don't need to set up DDNS and you can skip step 3 and step 4.
Here is instruction.http://www.sanncegroup.com/kb/index.php action=artikel&cat=11&id=366&artlang=en
4. Please refer to this picture below to fill in DDNS information into recorder's DDNS setting.
5.Please use a computer to go to the router's page to do port forwarding with recorder's IP, Http Port, TCP port. You can refer to this picture to find the recorder's IP，Http Port and TCP port.
You can refer to these steps below to get some help about how to do port forwarding.
Finally, if DDNS and port forwarding succeed, address like http://luxiachangsha.hopto.org80 can be opened anywhere on any computer.
(Notice: if your network's external IP is static, not dynamic, the remote view address is http://externalIP:http port on the computer)
For phone view, please still use the app Sannce view. But when you add system, please use the DDNS address, not the camera's SN. Finally, when you are outside, the phone can also connect the system to view.