The camera connects to the NVR by its own wifi.
When the camera's wifi signal is too weak, we can use another camera which signal will be better, act as a bridge to connect the weak signal camera to the NVR.
Steps to setup:
1. Pls right-click the mouse, and click "video manager", Then pls click "Repeater".
2 Click Refresh to get the repeater status of the cameras. Then you can connect the camera to the bridge camera by clicking the "+" icon. For example, if you want to connect camera 2 to the NVR via camera 1, you can click the "+" icon after camera 1.
Then click "Save".
4 After configuration, you should wait several minutes for the camera to reconnect. Then click Refresh to get the new repeater status.
1 If the line between NVR and Camera is red. It means that the signal is too weak to repeat. You should reduce the distance between NVR and camera, then click Refresh.
2 The signal intensity of the Repeater Camera(nearer one) must be up to 80% for the farther one to connect.
Radio antenna extension line
A radio antenna extension line(3 meters long) is used to avoid signal loss owing to the obstacle(such as a wall) between the NVR and camera. The antenna extension line should be near the NVR.
Note: If you have to change the antenna with the 3-meter Radio antenna extension line, please restart the camera to reconnect.