XMeye - How to Connect DVR/NVR on Computer Browser?

Applies to:

DL41B/DL81B/DL41A/DL81A/DL41D/DL81D/DH81S/DH81X/DH81NG/DM41D/DM41A/DM81A/DN41D/DN81D/DN41S/DN41NA/DM41H/DM81H/DM21O/DM31O/DE41N/DE81N/DN81NB/DM81Z/DM61W/DG81CP/DG81CQ/DH81NK/DG81CR/DH41NK/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT81DQ/DT41DC/DT61ER/DG41BE/DG81BE/NP41F/N43SU/N44SU/N48PZ/N481U/N441U/N44PBD/N461W/N48PAU

The method is for both the local view and remote view because they are totally the same.

1. Connect your DVR to your router using an Ethernet cable

2. Check if the system has connected to the router and Internet successfully. 

https://support.sannce.com/hc/en-us/articles/900000434343

3. Find your system‘s serial number（SN）. 

https://support.sannce.com/hc/en-us/articles/900000433143

4. Open website www.xmeye.net

You had better use IE, not chrome, not Firefox, not EDGE for win 10. Because we only have the web plug-in for IE web browser now.

It will ask you to install a plug-in support.annke.com/document/XM/General/plug/NewActive.exe

6. If you log in by device, below are the steps.

Here is instruction on where to find a serial number of the system.