Applies to: Type 1
Generally, the IP camera is connected to NVR and we can configure all settings of IP camera in NVR's system. But in fact, we can access to IP camera system individually and change settings.
You can get some extra functions on camera where you can't get on the NVR system such as switch on IR of the camera individually, flip image of the camera, reset the camera to factory default individually, and so on.
Here is the instruction.
1. Plug the NVR into the router with a network cable and find out the camera's IP in NVR's system.
2. Get a computer which is connected to the same router as NVR is to access the camera with its IP on the browser. The default user name is admin and password is none.
A window will pop up to let you install a plug-in. If you find your computer said it is not safe, please refer to instruction in link to change your IE setting so that it can be installed.
3. You can change the setting of this camera, not all cameras.
Change the time of this camera.
Reset this camera to factory default
Make this camera‘s infrared light automatically turn on and off.