How to connect an IP camera to the DVR?
1.The IP camera needs to support onvif protocol.
2.The DVR needs to support IP camera connection.
3.The resolution of the IP camera should be equal to or lower than that of the DVR's IP mode.
Click [Main Menu] Enter the password which you set on DVR system. If the password is not set before, the default is null and just keep the password box blank.
Click [System]-[Digital]-[Channel Type] to enter the channel type setting interface. Please change DVR to IP mode or IP analog mode. After the mode is changed, the syetem will restart.
Please connect the DVR and the IP camera to the same router with ethernet cable respectively so that they are in the same network area. （If it is a Wi-Fi IP camera, it will connect to the router via Wi-Fi rather than via the ethernet cable.)
Click the “+” icon. Enter the password which you set on DVR system. If the password is not set before, the default is null and just keep the password box blank.
Please click [Search], select the camera, click [Add], input the password and then click “Apply”.
Check the connection status, click “Exit” and the live video will appear. If you find the network status shows “connected” but there is still no image, please change the video standard or restart the DVR.
Please click [Main Menu]-[System]-[General]-[Video Standard] to enter the video standard setting interface.