How to connect DVR/NVR on computer software CMS?

Applies to:

DL41B/DL81B/DL41A/DL81A/DL41D/DL81D/DH81S/DH81X/DH81NG/DM41D/DM41A/DM81A/DN41D/DN81D/DN41S/DN41NA/DM41H/DM81H/DM21O/DM31O/DE41N/DE81N/DN81NB/DM81Z/DM61W/DG81CP/DG81CQ/DH81NK/DG81CR/DH41NK/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT81DQ/DT41DC/DT61ER/DG41BE/DG81BE/NP41F/N43SU/N44SU/N48PZ/N481U/N441U/N44PBD/N461W/N48PAU

The software 'CMS' can help you to manage your recorder both locally and remotely.?

But before please go to Main Menu--Info--Version to confirm NAT status is connected. If it's not shows connected,you can refer to this link below to get some help.

http://www.sanncegroup.com/kb/index.php?action=artikel&cat=9&id=87&artlang=en&highlight=dvr

This link below is new CMS software for windows computer.

www.sanncegroup.com/document/XM/General/client/CMS_V3.1.0.8.T.20170417.exe

You can refer to these steps below to add recorder to CMS.

1.Please download CMS and install it on your computer according to the

 instruction in the download file.

2.Please run the CMS, the default User Name is super, password is blank 

(no password).

3.For the first time login, you will see the interface as the picture below shows.

4. Please add recorder, you can click System on the bottomright corner. 

Then go to Device Manager, click ADD AREA to create a zone. 

Name the zone yourself and click OK.

5. After adding area,please click the area name you created then click on   to add your recorder.

Device Name: named it by yourself

Login type: choose Cloud

Serial ID: You can refer to this link below to find Serial ID.

 http://www.sanncegroup.com/kb/index.php?action=artikel&cat=9&id=40&artlang=en

User Name/Password: default is admin and blank,it's same as your recorder.

Then you can Click 'OK' ,you could double click to open this device.

6. After you add you recorder successfully,you can view and manage your

recorder on CMS.

7. Here is the introduction about the CMS interface.

Note: If you have problem to add DVR/NVR to CMS, please double check the connection between your DVR/NVR and the Internet and upgrade your CMS to the latest version.