All camera product
You can refer to these steps below.
1. Please uninstall the small screw.（skip this step if your camera doesn't have the small screw.）
2.Please rotate the Locker counterclockwise until the locker becomes lose. Remove the Snap Ring another little Dome.
All the components of the camera will be exposed to you.
3.Please fix the Mount Bracket to the mounting location using the 4 screws supplied in your package.
As shown in the picture, push the four screws into the four holes on the Mount
Bracket, then twist the screws into the holes using the screwdriver.
4.Please attach the Dome to the Mount Bracket. Rotate the Dome to make sure that the lens of the camera is facing the camera’s monitoring area. Then attach the Snap Ring to the Dome.
Note:When attach the Snap Ring to the Dome, make sure that the Dome leans toward the groove of the Snap Ring.
5. At last, please attach the Locker to the Main Body.
Hold the Dome and Snap Ring onto the Mount Bracket, and rotate the Locker on clockwise until it is tight. The camera is now installed on the mounting location.
6.Please fix the small screw on th base.（skip this step if your camera doesn't have the small screw.）